Ultrasonic scanning microscope when the choose and buy must look at its working parameters, to choose suitable ratio, because microscope are high-tech instruments, the parameters of some gap may occur defects in practical application process, so whether it is a scientific research institutions, colleges and universities, or the ordinary private enterprises, if there is the demand of the scanning microscope, to urge the professionals of choose and buy, The following Xiaobian briefly describes the main differences between ultrasonic scanning microscope and ultrasonic detector.

The main difference between ultrasonic scanning microscope and ultrasonic detector

First, frequency gap

First of all, the ultrasonic microscope and ultrasonic detector parameters in science has a large gap, there is significant difference between the frequency of them, for example, the specific guidelines can search out the microscope parameters, moreover, can be focused ultrasonic scanning microscope, and the detector can't focus, and ultrasonic microscope microscopic image is shown in the internal structure, and ultrasonic detector can't imaging, Because it only detects the internal waveform at a single point.

Two, from the functional point of view, ultrasonic scanning microscope is more rich, for example, it can be similar to CT, by accepting the internal waveform threshold selection, can do tomography on the internal structure, can be on the basis of imaging each layer of microscopic images clearly listed, the function of ultrasonic detector is not. In addition, many functional detectors of ultrasonic scanning microscopy are absent.

Three, the application range of ultrasonic scanning microscope should be broader, such as it can be used as the internal inspection of large metal structures, especially some high-tech industries, such as the output of oil pipelines, structural inspection of aircraft and ships, railway and bridge inspection of large projects, etc., can be achieved by ultrasonic microscopy. Ultrasonic scanning microscopy is also available for internal testing of semiconductor devices and micro-processed materials.

Therefore, through the above introduction, it can be known that the detector is the detection of internal metal damage, while the scanning imaging microscope is the display of tissue images, such as wire arrangement, metallographic structure, so the ultrasonic scanning microscope will be slightly better in the application. Not only that, from the point of view of late maintenance, because the ultrasonic scanning microscope in the design, multiple optimization design and later maintenance is relatively simple, there is no complex maintenance engineering, no pressure for the use of the place.