Special ultrasonic cleaning equipment for descaling has the effect of equipment cleaning and disinfection, workpiece massage decomposition emulsification. The application of ultrasonic oscillator in the alcoholization work can accelerate the alcoholization reaction and improve the reaction efficiency. This ultrasonic cleaning equipment also has a certain effect on the elimination of common bacteria, such as E. coli and staphylococcus, the elimination rate can reach more than 50%. However, some precautions must be strictly enforced when using such an oscillator.

First, the liquid level is too low. Because the highly rated ultrasonic oscillator is a high instrument in the new technology, a series of preparations should be made when using it. To ensure the safe operation of equipment, the premise is moderate liquid level. Once the liquid level is found to be too low, the cleaning solution should be added in time. If the power is turned on at no or low level, it is easy to damage the device.

Second, be careful not to use strong volatile solvents. In general, trustworthy ultrasonic oscillators require the use of a unique cleaner, but must ensure that the cleaner is not volatile or weakly volatile. Because the evaporation of acid-base detergent will cause a fatal blow to the system, the general volatile solvent used in the equipment will reduce the working efficiency and sound pressure of the oscillator.

Third, do not overheat when using ultrasonic oscillator, easy to ignore the application temperature of cleaning agent. Most acid - base cleaners have rigid operating temperature requirements. Cleaning effectiveness is severely reduced when the temperature of most cleaners themselves exceeds 50 to 60 degrees Celsius. Overheating of unique cleaners may also pose a risk, so special attention should be paid.

Fourth, pay attention to the high-frequency line around the hole without impurities. Before using the ultrasonic oscillator, we must ensure that there are no other small particle impurities around the oscillator, to avoid entering the high-frequency line hole and other precision parts when the ultrasonic oscillator is working. The cleaning of special goods can also be cleaned with distilled water first, and then cleaned with professional cleaning liquid.

The above is the special cleaning precautions when using ultrasonic oscillator. In addition, professionals remind you that after use, you must pull out the power in time to prevent the internal weak current according to the ultrasonic oscillator long-term weaken its service life, pay attention to the working time is not too long, generally 8 hours as the boundary, 8 hours after indirect work, to avoid low efficiency or damage to the equipment.