The vibrating rod has a key effect in the ultrasonic cleaning machine. It can only increase its service life by paying attention to the maintenance during the whole process. Let's take a look at common problems.

1. Check the ultrasonic vibration rod regularly

Please carry out regular maintenance during application and check whether the connector is biased during maintenance. When the resistance of the grounding wire is too low, it must be dried. In addition, the cover of the ultrasonic vibrating rod is also periodically opened, which promotes the dust stored on the circuit board to be blown in by air compression and improves the service life. Because long-term application will cause adhesion on the surface layer, which will not only cause specific effects on the whole process of cleaning objects, but also affect the service life.

2. Put in a ventilated environment

We all know that household appliances can't be placed in a wet and cold natural environment. When placing goods in a wet and cold natural environment for a long time, they will be corroded and damaged, except for ultrasonic vibration rods. Therefore, when applying, we must maintain long-term air flow through the natural environment to reduce their service life by waterproof steam and smoke erosion. Even if it is applied, remember to clean the surface stains and dirt on time to ensure internal cleaning. The service life is also related to the excellent maintainability and not close to the natural environment of corrosive chemicals. Because it is made of stainless steel plate, the area close to the acid will corrode the stainless steel plate. In addition, when the machine and equipment are not used, please keep the machine and equipment clean and drain the turbid water.