The X-ray machine needs the cooperation of the personnel when it is used. Next, I will tell you what problems should be paid attention to during the operation:

Please do not open the equipment that has not been used for more than 6 months! It is necessary to restart the X-ray detector by technicians, otherwise it will cause damage to the X-ray detector. Before operating the equipment, you should know the applicable radiation protection regulations. If someone wants to operate your equipment, please ensure that he is a qualified operator and understands all safety instructions, laws and regulations. The equipment installation, electrical connection and replacement of electromechanical components can only be carried out by experienced personnel. If the equipment shell, cable or conveyor belt is damaged, it is necessary to stop running immediately.

The equipment shell plate and parts can only be opened by qualified personnel. Prevent the correction or change of any part of the system security. The installation, commissioning or protection of equipment can only be completed by trained and qualified personnel. The device can only be used to view items! It is forbidden to look at human body and other living things. Do not sit or stand on the conveyor belt. When the device is activated, no part of the body is allowed to enter the viewing channel. Make sure that the baggage is not stacked in the inspection channel or exit! If the baggage is blocked in the inspection channel, the industrial X-ray machine should be closed before cleaning and dredging. Prevent various liquids from flowing into the machine. If this happens, close it immediately. The hot air ports on the equipment and display should not be blocked. It is necessary to ground the system before operation. The main power outlet and the device position need to be firmly grounded. When the equipment is working, try to avoid standing near the entrance and exit. Do not let the equipment work when the lead curtain is damaged or turned over. Although the X-ray dose is very small, non-operating personnel should try to stay away from the equipment. Open the door. Prevent the correction or change of any part of the system security. The installation, commissioning or protection of equipment can only be completed by trained and qualified personnel. The device can only be used to view items! It is forbidden to look at human body and other living things. Do not sit or stand on the conveyor belt. When the device is activated, no part of the body is allowed to enter the viewing channel. Make sure that the baggage is not stacked in the inspection channel or exit! If the baggage is blocked in the inspection channel, the industrial X-ray machine should be closed before cleaning and dredging. Prevent various liquids from flowing into the machine. If this happens, close it immediately. The hot air ports on the equipment and display should not be blocked. It is necessary to ground the system before operation. The main power outlet and the device position need to be firmly grounded. When the equipment is working, try to avoid standing near the entrance and exit. Do not let the equipment work when the lead curtain is damaged or turned over. Although the X-ray dose is very small, non-operating personnel should try to stay away from the equipment.

The question about the operation of the X-ray machine has been shared with everyone. We will regularly ask you to push more relevant knowledge. Welcome to leave a message for consultation.