The development of the cleaning industry has led more and more industries and enterprises to use ultrasonic cleaning machines. There are many advantages of ultrasonic cleaning machines. First of all, its cleaning effect is very good, and its operation is very convenient and fast. Now it is used in many industries, such as surface spray processing industry, mechanical industry, electronic industry, medical industry, semiconductor industry, watch jewelry industry, optical industry Textile printing and dyeing industry, etc.

The speed of the elastic vibration body of the ultrasonic motor and the way of friction transmission of energy determine that it is a low-speed motor. Its energy density is 5 to 10 times that of the electromagnetic motor, which makes it possible to obtain a large torque without the need for a reducer, and can directly drive the actuator. Therefore, the high energy density also leads to poor heat dissipation. The overheating inside of the ultrasonic motor will affect the performance.

We need to understand the use environment of the ultrasonic cleaning machine. First of all, we need to be cautious and careful in the treatment of noise. The noise should not be too high during heat dissipation. Generally, when the cold air is used for heat dissipation, the fan will increase the speed when the heat becomes larger, thus increasing the noise. In addition, the fan heat dissipation is also easy to accumulate dust, which has a certain impact on the internal environment, so it adopts water-cooled heat dissipation method. At present, this method has good heat dissipation effect. Because it changes the previous heat dissipation method, it has green stability. In the future, more equipment will introduce water-cooled heat dissipation.

How to maintain the ultrasonic cleaning machine?

First of all, it is necessary to maintain the ventilation, dryness and cleanness of the workplace where the cleaning machine equipment is located. For the cleaning fluid, it is necessary to clean the dirty place in time, which can improve the durability of the tank. The ventilation of the electrical control box and equipment should be kept away from dust, corrosive gas and water vapor. When compressed air is used to clean the attached dust, it is necessary to test the insulation performance of the equipment. For the electrical components that are prone to aging, it is necessary to regularly check and check the grounding wire, Ensure that the equipment is well grounded. The project needs electricians with professional experience to carry out. We need to make sure that the equipment power supply voltage requirements are met, so we need to regularly test the power supply, avoid working under too high or too low unstable power supply, regularly replace the filter element, regularly fill the engine oil with transmission mechanism as required, and regularly change the gear oil of the reducer to ensure that the moving parts work under good lubrication conditions.

After the maintenance of the ultrasonic cleaning machine, if there is a fault, it needs to be solved in time. For example, the following faults occur:

1. If the insulation of the electric heating component of the shell is poor or the circuit of other components is connected to the shell, it is necessary to replace the components with poor insulation and connect the grounding wire;

2. The ultrasonic generator or transducer with abnormal cleaning effect will be accompanied by abnormal sound. Check the resistance at both ends of the transducer lead and remove the transducer guard to see if there is any abnormality.